IN STOCK - AVAILABLE NOW!
See our bundle deals below for saving $$.
Drink bottles are expensive, and an item you use each and every day.
Protect your bottle & your wallet by using our Sili Skins for a soft landing on hard surfaces.
While many bottles companies sell replacement parts for the lids - you can not replace the bottles body unless you buy an entirely new (and expensive) bottle.
Sili Skins will..
-Prevent scratches on the bottles body - now it wont matter if you carry your keys in the same hand, knock it around on the job site, have it rubbing up against another bottle in your bag, or have it bouncing around in your bike basket.
-Help prevent dents by taking some of the impact during falls.
-Soften the sound of the bottle being placed down, no more fear of waking anyone in the household up when you place your bottle down on the kitchen counter or bedside table.
-Give you grip, so even when your bottle is full and heavy, it will be less likely to slip out of your hand.
-Show your bottles colour, branding and personalised engraving through the clear skin.
-------------------
EVERYONE LOVES A BUNDLE DEAL!
Skins + Engraving bundle:
-Grab a Sili Skin & automatically get 10% off your bottle engraving with us.
BYO Bottle Engraving can be found >>here<<
-------------------
Sizes:
We designed Sili Skins specifically for our families Yeti bottles.
However we have personally tested our Sili Sleeves on many popular drink bottles & can coolers. Use our list below to see if your bottle is compatible.
Please note, we are continually checking bottles, so this list will continue to grow.
Feel free to check back later if you don't see your bottle right now.
7.5cm ⌀ Sili Skins will fit...
YETI 18oz 532ml Rambler Bottle
YETI 12oz 354ml Rambler Junior Kids Bottle **
YETI 375ml Rambler Colster Insulated Can Cooler **
SISTEMA 650ml Double Walled Stainless Steel
DECOR 750ml Hydro Insulated Double Wall Stainless Steel
ESKY 700ml Burleigh Stainless Steel Bottle
MARQUEE 375ml Insulated Can Cooler **
ANOTHER 550ml Insulated Drink Bottle **
FRANK GREEN 20oz 595ml Ceramic Reusable Bottle
ANKO 530ml dual function bottle (Owala dupe) **
8.5cm ⌀ Sili Skins will fit...
YETI 26oz 769ml Rambler Bottle
YETI 10oz 295ml Rambler Stackable Lowball **
FRIDGY 780ml Grip Bottle
OWALA 945ml 32oz Freesip Bottle
9.5cm ⌀ Sili Skins will fit...
YETI 36oz 1065ml Rambler Bottle
SMASH BLUE 1.2L Stainless Steel Epic Double Wall Sipper Bottle
FRIDGY 1080ml Grip Bottle
MARQUEE 1100ml Thermal Bottle
FRANK GREEN 34oz 1L Ceramic Reusable Bottle **
OASIS 1.2L Titan Bottle Double Wall Insulated Stainless Steel
KATHMANDU 32oz / 950ml **
HYDROFLASK 32oz / 946ml **
-------------------
Specs:
-Designed in Perth, Australia.
-We use dishwasher, microwave & food safe silicone
-7.5cm ⌀ Sili Skin has a height of 19cm
-8.5cm ⌀ Sili Skin has a height of 19.6cm
-9.5cm ⌀ Sili Skin has a height of 20.8cm
-You can cut your Sili Skin to any height needed.
-The thickness of the skin is 2mm.
Troubleshooting:
-If your dishwasher has left your Sili Skin looking hazy or clouded - turn your oven to 175C and bake the Sili Skin for 15 minutes. Ensure it is on a clean rack, or ideally unused baking paper. Remove your Sili Skin from the oven carefully. While your Sili Skin is still warm, wash it with hot tap water and dishwashing detergent. Repeat if needed.
-If you're having trouble getting your Sili Skin on, thoroughly wet the inside of the Sili Skin, and the outside of your bottle with water. Follow the video tutorial on the QR code sent with your order.
Alternatively, using isopropyl alcohol spray instead of water works great and dries faster than water - if you have some laying around your home, give this a go!
** The 'Sili Skin' will need to be cut down by the customer to fit the correct height of the above ** marked bottles.
⌀ = Diameter / Width of the bottles.
